iFlight Taurus X8 Pro HD 8-inch 450mm 8S FPV Racing Drone BNF


iFlight Taurus X8 Pro

iFlight Taurus X8 Pro HD 8-inch 450mm 8S FPV Racing Drone BNF w/DJI Air Unit BLITZ F7 Pro Flight Controller 80A 2-8S ESC

$2300 – Check latest price on: AliExpress, Banggood

iFlight Taurus X8 Pro Features:

  • Big size XING2 3110 // The power motors with extreme lift and flight performance
  • 8x single X-Class grade ESC motor drivers for more reliability
  • 8S power system // More power and speed
  • Redundant iFlight ESC Commander PCB // Power distribution board with high capacitance, filtering and heat dissipation
  • GPS module pre-installed (BF GPS rescue or INAV GPS RTH feature available)
  • Universal camera mount and accessories for a wide range of cameras to install


  • Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
  • To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”
  • GPS Rescue is ON by default. Please check our linked article on “GPS Rescue Mode // Setup”
  • Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

iFlight Taurus X8 Pro Specification
Brand: iFlight
Model Taurus X8 Pro
GPS Module iFlight M8Q-5883-GPS & Compass V2.0 (LINK)
Total Dimensions 430mm*350mm (body dimension)
Upper(middle) Plate Thickness 3.5mm
Bottom Plate Thickness 3.5mm
Top Plate Thickness 3mm
Arm Thickness 8mm
Wheelbase 450mm
Propeller Size 8 inch
Motor XING2 3110 900KV
Controller BLITZ F7 Pro Flight Controller
Weight 2.3kg±5g (without battery)
FC // BLITZ F7 Pro Flight Controller
Mount Pattern 35*35mm / 4mm PCB hole diameter
Smart audio/IRC Tramp VTX protocol  Support
Firmware Target IFLIGHT_BLITZ_F7_PRO
BlackBox 512MB Onboard
Dimensions 41*41.5mm
BEC 5V/2.5A, 12V/2A
Barometer DPS310
OSD Chip AT7456E
LED controller: Yes
MCU STM32 F722
Beeper Pad Yes
Gyro MPU6000
Weight 17g (±2)
ESC // 2 x iFlight ESC Commander PCB (8x SucceX X80A)
Dshot600, Proshot, Oneshot, Multishot Support
Firmware Target iFlight-BL32-PRO
48kHz PWM Frequency Support
Mounting Pattern 40*17mm
Constant 80A/Burst: 100A
Capacitance 470uF/35V
BlHeli32 Telemetry Yes
Current Sensor Yes
Input 2-8S LIPO
MCU F051
Weight 8.1g

Check lowest price of iFlight Taurus X8 Pro:


Please enter your comment!
Please enter your name here