iFlight Protek25

iFlight Protek25 Pusher HD SucceX-D 20A F4 Whoop AIO 2.5 Inch 4S Cinewhoop FPV Racing Drone PNP BNF

Check latest price on: AliExpress, Banggood

iFlight Protek25 Features:

  • UPGRADED PROP GUARDS V2.0 (Material optimized)
  • No Props or frame in view!
  • RunCam 4K Camera
  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
  • High performance SucceX-D 20A Whoop F4 AIO Board to save weight and space
  • Low Resonance frame construction (Less Jello, more Cinematic footage)
  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
  • Pre-tuned with smooth freestyle settings
  • Butter smooth XING 1404 5500KV motors


  • Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
    To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
    Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

ProTek25 BNF Specs:

  • SucceX-D 20A Whoop AIO
  • Motor: XING 1404 5500KV
  • Wheelbase: 114mm
  • Body Size: 91*68.7mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 2mm
  • Top and bottom plate spacing: 24mm (aluminum standoff height)
  • Propeller size: 2.5 inch
  • FC pattern: 25.5*25.5mm / 20*20mmmm
  • FPV cam spacing: 20mm
  • Weight: 194.3g (without battery)
FC // SucceX-D 20A F4 Whoop AIO
Mounting pattern:25.5*25.5mm/φ3mm
BEC output:5V 2A/10V 2A
INA pad:UART2 (nR2)
Constant current:20A,25A(Burst)
Current sensor:yes
ESC Telemetry:no
ESC Firmware:G-H-30 BLS
VTX // SucceX Mini Force 5.8GHz 600mW VTX
Power: PIT/25/200/400mW/600mW
Antenna interface: MMCX
VTX protocol : IRC Tramp
Output 40 channels.
Size: 29*29mm
Mounting pattern: 20*20Φ3/25*25 mmΦ2
Weight: 4g

Check lowest price of iFlight Protek25:

Leave A Reply

Exit mobile version